MATRIX
720 Series
Highly customer focused, Matrix is widely known for its superb engineering solutions for motion control, automation, and bio-medical uses. The valves are superbly engineered for the most demanding OEM applications where ultra high speed, uncompromising reliability, and ultra long life are warranted.
This series is available in normally open/normally closed configurations. Specific models can also be used in vacuum applications.
- Extremely compact
- Body ported or manifold ported
- Flow rates of 100 LPM
- Insensitive to vibrations
- Low power consumption
- Precise repeatability throughout useful life
- Wide application use [positioning systems, robotics, pilots, etc.]
| MATRIX 720 Series Valves | |
|---|---|
| Working fluid [0 to 50 deg. C] | Non-lubricated dry air/inert gases |
| Filtration requirements | 40 microns minimum |
| Operating pressure | 0 to 8 bar |
| Operating temperature | - 10 to + 50 deg. C |
| Opening time | < 7 to < 2 mS depending on model |
| Closing time | < 3 to < 2 mS depending on model |
| Maximum frequency | 100 to 300 HZ |
| Life expectancy | 500,000,000 cycles minimum |
| Function | Normally open/closed |
| Type | Two position 2 way and 3 way |
| Inlets | One |
| Outlets | One |
| Flow | 50 to 100 LPM |
| Voltage | 12 to 24 V DC [direct operated] |
| IP rating | IP 62 |
| Controls | One |
| Connection | Integrated cables |
| Nominal size | 41 x 40 x 12 mm |
| Miscellaneous | Can be manifolded |
Valves can be modified to suit applications - dependent on quantity
Every attempt has been made to provide accurate information. However, please consult with David & David before buying or using the valves by filling out our Contact Form.
